Steinway & Sons
BWS-110
Steinway & Sons bass performance from a shallow design
The BWS-110 a high-performance in-wall woofer for custom-installed Steinway Lyngdorf systems that require the most shallow in-wall solution, perfectly fitting 4 inch/10 cm cavity walls. Despite its shallow construction, it is equipped with a very capable high-excursion woofer to deliver a precise, punchy, and powerful bass. With the Steinway Lyngdorf Integrated System Approach and powered by the A1 or A2 digital amplifiers, the BSW-110 perfectly complements any Steinway & Sons in-wall, on-wall, or floorstanding loudspeaker. It can be used in-wall or custom-mounted in-ceiling and comes with a paintable, magnetically held grill to cover the woofer front.
Powerful high-excursion 10 inch woofer
The BWS-110 utilizes a patented high-excursion shallow woofer design, customized for Steinway Lyngdorf and based on an innovative voice-coil/cone geometry and suspension which allows the highest excursion from the most space-saving construction. A four-layer voice coil, an ultra-rigid dual aluminum cone, a very powerful neodymium magnet, and an extremely rigid cast aluminum basket provide impressive bass performance, matching the renowned sound quality of Steinway & Sons speakers.
Unique features
Extremely shallow high-excursion woofer
An unusually shallow and patented woofer design with a customized four-layer voice coil, powerful neodymium magnet, and stiff dual aluminum cone to allow a space-saving yet high excursion construction.
Ideal for 4 inch/10cm cavity walls
The BWS-110 is specifically made for custom installations which require the most shallow woofer solution, perfectly fitting 4 inch/10 cm cavity walls.
Rigid enclosure construction
The very rigid and sealed enclosure is made from high-quality MDF with internal bracing to avoid unwanted resonance and vibration.
Specifications
Description: Passive in-wall woofer
Woofer: 1 x 10-inch, dual aluminum cone, 4-layer voice coil, neodymium magnet
Enclosure: MDF with internal bracing, 19mm and 16mm
Frequency range:30 – 200 Hz (-3 dB)
Amplification: 1 x 400 W (A1 or A2 amplifier, 1 channel required)
Nominal impedance: 4 Ohm
Max SPL (IEC long term): 109 dB (60 V / 1 m)
Sensitivity:82 dB (2.83 V / 1 m)
Power handling (IEC long term): 300 W
Connections: Screw type (for bare wire)
Recommended placement: In-wall floor-standing, boundary woofers
Dimensions (H x W x D): 1000 x 350 x 88 mm / 39,4 x 13,78 x 3,5 inches
Weight: 16 kg / 35,3 lbs
Standard finishes: Matte black, paintable front grill
Downloads:
Fact sheet
Installation manual
Technical drawings
Pictures
Integrated system approach
All Steinway & Sons products can be combined for individual Steinway & Sons sound systems and follow our integrated system approach. The chosen loudspeakers are programmed into the processor, and amplifiers are connected reliably using our own digital signal connection. RoomPerfect™ will further acoustically calibrate the loudspeakers to the room. With this integrated system approach, we can guarantee the legacy of absolute perfection that comes with the Steinway & Sons partnership. A perfection which can never be attained mixing products “off the shelf” from different manufacturers.
This loudspeaker can be combined with the following models, depending on the room and customer wishes.
STEINWAY & SONS lsr-210
STEINWAY & SONS LSR-212
STEINWAY & SONS Model M center
