NOTE: SW versions earlier than 1.0 must first be updated to version 1.0 before SW version 1.5 Release 1.5_RC_2 (20-11-2013) -Power: On Zone or Main power down save changes to source configuration -IP control: When receiving Resolution change message read data directly Release 1.5_RC_1 (14-11-2013) - Fixed Dolby TrueHD wraparound issue - Fix delays not saved for focus position 3-8. Release 1.4 official release (12-09-2013) P1 Serial Control Manual: Updated with lipsyncrange and lipsync commands Factory reset: Disable all enabled debug options when factory reset SNMP: Reduce exposed information (fix crash) SNMP: Include SNMPv2-TC MIB in html/sla-mibs.zip system init: Start IP control and Serial control early in the init process. IP/serial control: Support both lipsync trim and libsync processor delay (!LIPSYNC(X) and !LIPSYNCRANGE(X,Y) both also as status messages when changed). Release 1.4RC5 (05-09-2013) -Front: If front do not answer on BOOTDONE message try again -Zeroconf/Bonjour: Change name and fix name collision handling. -Shutdown: Protect against multiple instances of shutdown -script Speaker configuration: Log errors as shown on screen to system log -System log: If debug logging enable continue to log to /config/errlog -IP/serial control: Fix !DEVICE? response -IP/serial control: Add !INTERFACE? command -IP/serial control: Support data dumping to system log -IP/serial control: Command for requesting Lipsync max delay added -IP control: Newer write 0 bytes to a socket -IP/serial control: When powering on, the mute, vol and src state are invalid -IP/serial control: Fix a buffer overwrite Release 1.4RC4 (16-08-2013): - DHCP is now default. Release 1.4RC3 (16-08-2013): - P1 SNMP: Update with IANA assigned PEN. Updated MIB definitions is retrieved from http:///sla-mibs.zip Release 1.4RC2 (16-08-2013): - fix bug in handling of returned error code from disk check (e2fsck). The e2fsck Manual describes codes 4-7 as auto uncorrectable errors and only 4 was assumed (seen!) before. - Fix not verifying writes to Host module FLASH memory when updating via CF card (USB and web updates where OK). Also write update status to system log. - Fix reset of channel/speaker delays and level offset in configuration after introducing the gain offsets (output channel gain offsets). Release 1.4RC1 (14-08-2013): Our own release notes: - Fix of coldfire/frontpanel update problem. - CF card handling improved. Force check and correct file system if auto check failed. Setup controller for DMA and PIO returned to previus setup and returns false on DMA requests. Add delay after setting ide drives (include CF Cards) in standby. - DSP decoding updates. Fixed several Dolby related issues. - Added gain offsets to output channels - Dolby requirement. - Lib sync limited to 250ms. - IP-control: Add cmd !DEVICE? response !P1 - Added check - After writing images to Host board internal Flash, check the contents. - drivers/k1front: Increase front panel timeout - Added improved debugging and logging facilities. Release 1.3 official, released 13-05-2013: Our own release notes: - Fix slow audio problem (side effect of CPU load issue fix) - Fix CPU load issue (disable audio packet and CTS packet receive interrupts) - Fix HDMI receiver interrupt handling problem (sometimes important interrupts could be missed if timing was just right) - Fix audio drop-outs with Crestron equipment (tolerate larger drift/jitter with CTS timestamp values) - LAN IP-control on port 84. - bonjour network services support - Web-server and caching: Web browser do not cache the static content served via the p1 web interface. Fixed to increase performance of bonjour in Windows, but gives better performance on all platforms. - Logging of errors to /config/errlog: Current P1 older than 1.3-RC3 only had very few errors send to systemlog. The remaining errors where printed to stdout/err (debug console) or /dev/null. - File system check (if needed) of /config (and /mnt) before mount at boot: Fixes issues with missing info in logfile from shutdown sequence and possible other forms of file system corruption. - SNMP support- for Ihiji invision support. - DSP updates -fix Pro Logic side channels sometimes swapped -Downmix gain fixes on front end -TrueHD now always configured correctly *Reverted original DSP code, updated build system (Morten 2013-04-20) Official Release notes: (Update to 1.2 before updating to 1.3) - General HDMI improvements - Removes audio dropout on devices with CTS timestamp drift. (tolerate larger drift/jitter with CTS timestamp values) - LAN IP-control on port 84. - Bonjour network services support - Web-server and caching: Web browser do not cache the static content served via the p1 web interface. Fixed to increase performance of bonjour in Windows, but gives better performance on all platforms. - SNMP support- for Ihiji invision support. Known issues with 1.3: -update of coldfire, front Atmel and Jennic, does not work. Update to 1.2 before updating to 1.3) Release 1.2 released 30-01-2013: - Speaker setup saving problem in ui fixed. - Save problem in audio processing menu(Dolby & DTS settings) fixed - HDMI tx now sends correct audio infoframe. - HDMI tx audio configuration is now fixed and audio down scaling is added so that audio formats are consistent with formats supported by TV:s. - RP focus point saving problem fixed. - Pixel clock latching edge is now changed with lower pixel clock frequencies. - HDMI tx audio out default setting is now changed to "Off". - HDMI tx audio out setting save problem in ui fixed. - N/CTS packets are disabled when tx audio is set to "Off". - TX audio is set on immediately when it is enabled from ui. - Added two new audio modes to ui: Dolby PLII 3CH, Downmix to front. - Fixed audio information delivery from DSP to HDMI driver to fix some audio issues. Known issues at this point: - With some players with format 1080p24FP and when Hdmi tx audio is enabled, the picture and audio blinks for about every five seconds. Can be stopped by turning tx audio off. - Sometimes when changing audio format with 1080p24FP 3D audio and video clocks get out of sync and an HDCP error occurs in screen. If HDMI tx audio is disabled this won't occur. - Formats 480i RGB and 576i RGB don't work. If output from the source is instead YCbCr then they work. - Problems with Cambridge audio: When selecting an input repeatedly or changing input repeatedly sometimes no audio is coming out and sometimes no video either. Release 1.1 3D release 18-06-2012: •3D video support. •Updated voicings •DTS express format support •All channels stereo/Party mode on stereo sources. •Fixed "DTS HD high res" no Audio issue. •CF boot card fix added (Now you have the option to use other CF-cards) •"Verify speaker setup" issue fixed. •Default EDID updated (when no display connected). The default EDID has been updated with correct information and 3D capability has been added. •EDID fixes - CEC address issue. This is a fix to the EDID Vendor Specific Data Block VSD byte 4-5 that ensures that connected units get the correct CEC address. •Du to regulations from DTS a 5.1 DTS Master Audio track will be displayed as 7.1 if the user has a 7.1 system. The new voicing settings are: •Music - Lowers the midrange to compensate for recordings that would otherwise sound too harsh. •Music II - Lowers the mid- and high. •Relaxed - Same as Music, but with an enhancement of the lower frequency •Tilt - A gradual dampening of high to low frequencies. •Action - Enhances the lower frequencies. •Action+Movie - Enhances the lower frequencies and dampens the higher frequencies.